.JPG)
You can put 1 army inside and in case of battle it will be joined by the settlement garrison (which you can't take out and is defined by the buildings you build). If you want to use multiple armies leaded by lords you just have to put them close to each other, work to defend, attack, siege, pretty much anywhere.
Full Answer
How do you treasure hunt in Total War Warhammer 2?
In Total War: Warhammer II, armies can treasure hunt in ruined settlements. Most provinces have a capital settlement and from 1-3 minor settlements. Minor settlements have only 4 building slots, and can only upgrade to level III. Province capitals (major settlements) have more building slots, and can upgrade all the way to level V.
How do I expand my Warhammer 2?
Expansion in Warhammer 2 is contingent on two resources: Gold, which you get from buildings, from looting enemy settlements, and simply as profit from a healthy economy, and population surplus.
What is the difference between Total War Warhammer 1 and 2?
Total War: Warhammer has the regional occupation system. This system limits which races can occupy which settlements. No faction can settle everywhere on the campaign map. Total War: Warhammer II has the climate system instead.
How do settlements work on campaign maps?
On the campaign map, settlements have a zone of control which prevents enemy armies from going too close without attacking. Most settlements will have garrison armies which are provided by the main settlement building, and protect the settlement from attacks. The controlling faction may also position an army directly a settlement to 'garrison' it.
How do I add units to my garrison Warhammer 2?
Via the game, you can build in the yellow building chain to add defenses and extra garrison to the settlement. Via modding, you can add units by editing the building_level_armed_citizenry_junctions_tables table.
How do you colonize ruins in Warhammer 2?
Ruined settlements can be colonized by an army. This takes a turn, money and many troops (ie: your army will become damaged). Skaven and Tomb Kings have the ability to colonize ruins and start them off at a higher level than other races, by spending food or using a Ptra's Necrotect.
How do you use units in total war Warhammer 2?
To move a unit in battle, left-click to select it, before right-clicking the location where you wish them to move to. In Total War: WARHAMMER 2, units in battle will charge towards a target by default.
What is the strongest unit in Warhammer 2?
Total War: Warhammer 2 – 15 Most Powerful Infantry Units & How to Counter Them1 Chosen (Chaos)2 Depth Guard (Vampire Coast) ... 3 Sisters of Slaughter (Dark Elves) ... 4 Har Ganeth Executioners (Dark Elves) ... 5 Phoenix Guard (High Elves) ... 6 Swordmasters of Hoeth (High Elves) ... 7 Waywatchers (Wood Elves) ... 8 Ironbreakers (Dwarves) ... More items...•
What happens when a Herdstone is destroyed?
When the herstone is destroyed, the bloodground will be purged and you can occupy ruined settlements within the destroyed herdstone-region. If you play beatment, however, you will get the herdstone-resource back, when the herstone is destroyed.
How do I get rid of Herdstone?
The Herdstone can be removed by attacking and destroying it like any other settlement.
What is considered large Warhammer 2?
Large Units Units are either considered large or small. Infantry, war beasts, and most artillery crews are small. Cavalry, chariots, war machines, monstrous infantry, and monsters are large.
Can you lose Warhammer 3?
0:391:15You CAN Keep Playing After Defeat in Warhammer 3 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd when you play on there's a chance that the ai faction will actually lose the final battle. AndMoreAnd when you play on there's a chance that the ai faction will actually lose the final battle. And you won't lose the campaign in this new seat if this works the campaign objectives won't be aborted.
Can I change unit size mid campaign?
Unit size is linked to a save. If you load a save that was started on low unit scale it will be on that scale regardless of your settings, as an example. So you can't change it mid campaign.
What is the strongest race in Warhammer 2?
Lizardmen. The Lizardmen are one of the strongest races in the game and have some very comfortable starting positions. If you're Hexoatl, you have plenty of quick expansion options and a few allies for confederation.
What faction has the best Monsters Warhammer 2?
If you want lots of chunky monsters, Lizardmen are the greatest, and of the Lizardmen, Kroq-Gar is the best big dinosaur dude. (That is arguable, but his +20 armor bonus for them is pretty good.). They have the biggest monster in the game, the Dread Saurian.
What is the best faction to play in Total War Warhammer 2?
Empire. Empire is a faction that plays the most like a traditional Total War faction and is the best one for newer players to start playing as. Along with this, the faction is relatively balanced and features a vast and diverse unit roster that allows players to experiment with different unit types.
What is a unit in Warhammer?
Armies on the battlefield are made up of units of many individual soldiers. Each unit is independently controllable and represented on the battle interface by a Unit card. One or more units may be selected at any time. Movement orders are issued to all selected units.
How do you change unit size in Warhammer 2?
Just go into settings and look for unit size in the graphics section. Originally posted by Chrysalis: Just go into settings and look for unit size in the graphics section. As sidenote, it only changes for a new campaign.
How many Warhammer units are there?
There are a lot of Warhammer 40K armies/factions. Choosing the right one is quite obviously the most critical choice you're going to make. You'll be spending money on the army, time building and painting it, and of course time playing with it.
What does unit mass do in Warhammer 3?
Unit mass is a unit stat that isn't often exposed in tooltips but is very valuable and will be more visible in WARHAMMER III. It is part of the calculations for the results of unit collisions due to charges, and most directly determines whether a unit is knocked back, down, or sent flying.
What are settlement options?
Settlement options. Settlement options are options that players can pick after capturing a settlement on the campaign map, or when moving an army into a ruin. Settlement options can differ depending on which race you are playing. "Razing" and "sacking" both redirect here. Please see below for what these options do.
What is the dilemma in TWW2?
In TWW2, rather than this option, you will instead get a dilemma: Warlord Defeated, Throgg Defeated or Wulfrik Defeated . Raze for the Serpent. Razes settlement and puts Serpent monument, giving allegiance with the Serpent. +6 favour with the Serpent, -2 favour with each of the other Gods. Raze for the Eagle.
Can Chaos armies establish cults in enemy settlements?
Establish Cult - Chaos armies can establish cults in enemy settlements to generate profit.
Can Tomb Kings spend Ptra's Necrotect?
Tomb Kings can spend a Ptra's Necrotect to colonise at a higher level. Treasure Hunt / Search Ruins. This option was added in Total War: Warhammer II. Armies/lords can now treasure hunt, getting a choose-your-own adventure style event which can result in positive, neutral or negative outcomes.
What happens if a faction loses all settlements?
If a regular (not horde) faction loses all of its settlements, but still has any armies left, these armies will suffer from attrition. Once those armies are defeated, their faction is eliminated from the game.
Why do enemy forces attack settlements?
An enemy army may attack a settlement in an effort to capture it. On the campaign map, settlements have a zone of control which prevents enemy armies from going too close without attacking.
Where can Norscan factions occupy?
Norscan factions may only occupy settlements inside the Norscan peninsula, or coastal/port settlements and racial capitals outside the peninsula.
How many building slots are there in a province?
Most provinces have a capital settlement and from 1-3 minor settlements. Minor settlements have only 4 building slots, and can only upgrade to level III. Province capitals (major settlements) have more building slots, and can upgrade all the way to level V. Thus, if a building chain goes up to level IV or V, it is usually best to construct it in ...
What happens if a settlement has walls?
If a settlement has walls, then armies have the option to lay siege to a settlement before attacking. When they do choose to attack, it will be a siege battle.
What happens if there is no garrison and no defending army?
If there is no garrison and no defending army, then a settlement can be taken without a battle.
How do settlements become ruined?
Some settlements on the campaign map begin as ruins. Settlements become ruined when they are razed by a hostile army. Ruined settlements can be colonized by an army. This takes a turn, money and many troops (ie: your army will become damaged).
How many Population Surplus points can you get in Warriors of Chaos?
Those points can accumulate up to 5 (more for Warriors of Chaos).
How many cities do you need to start a Horde kingdom?
Each faction (aside from the Warriors of Chaos, although the Horde system works in a similar manner) start with only a single city , which becomes the capital of your entire kingdom. This city will most probably be the first one to be fully developed (and you should do that). More settlements and provinces will quickly be under your control, but limited amount of gold and population surplus points won't allow you to develop all of them at the same time. In this chapter you will learn how settlements and provinces work, and how you can develop them.
How many buildings can you upgrade in the capital city?
The capital city can be upgraded up to the 5th level, allowing you to construct any building inside of it, and to upgrade it to the maximum level. Additionally, each capital city has up to 5 buildings slots (6 with the main building), allowing you to construct 5 different buildings.
What is population surplus?
Population Surplus is produced each turn for each province in which you have settlements - after a certain amount of turns have passed you will be given a Population Surplus point. Those points can accumulate up to 5 (more for Warriors of Chaos). You can check the amount of points available for a province, as well as the time needed for the next one to be ready on the province screen.
How many settlements are there in a province?
Each province consists of a varying number of settlements. The amount of settlements in a province ranges from 2 to 4. You can check it by clicking on any settlement in a given province - a window showing all of the settlements available in it will appear on the screen, together with the ones that are controlled by you, by enemy, or the ones that you haven't yet discovered.
What level do you need to build a military recruitment building?
If you want to have a military recruitment building, but it requires up to the 3rd level of the main building, construct it in a normal settlement so that you won't waste precious place in the capital.
What are the benefits of upgrading a kingdom?
Upgrading them will give you a number of benefits, such as: Access to new and higher-level buildings. Bonus to public order. Increased income. Increased income in the province and in the whole kingdom - available only to the main building of the first province you start with.