George is right, you only need melee units to capture cites, you can capture civ units and empty barb camps simply by walking any unit over it (but civ units can't capture civ units, as this goes against 1UPT) This is why ranged units are good for taking out barb camps, just snipe them till they're dead, then loot the empty tile! redwings1340
Full Answer
How do you settle a new city in Civ 6?
In order to settle (or found) a new city, you need a special civilian unit called a Settler. This is a standard land unit that is available right from the start of the game, but can only be produced in cities with a minimum Population of 2.
How do you attack a city in Civ 5?
Attacking Cities & Enemy Units: Combat Strategies and Tips Position your Units before moving into a City's Attack Range The purpose of War in Civ 5 is to take an opponent's Cities, as there is no real way to knock them down a peg otherwise. If you clear out a high-difficulty AI's Army, they'll just build another.
What happens when you capture another Civ's settler?
Sign Up for free (or Log In if you already have an account) to be able to post messages, change how messages are displayed, and view media in posts. I know that when you capture another civ's Settler, it turns into a Worker under your control.
How much do counters increase per city in Civ 5?
Before the first Golden Age, the increase is somewhere around +5 per city ( confirmation needed ). Great People counters increase (no longer in effect with the expansions). Choosing the right place to found a city in Civilization V is very important, and determines to a large degree how successful your empire will be.
Can you capture Settlers Civ 5?
Like other non-military units, Settlers cannot defend themselves and are easily captured unless protected by a combat unit. A Settler captured by a different civilization immediately becomes a Worker.
How do you capture cities in Civ 5?
If a city's hit points reach 1, any enemy unit with melee attack (and only melee attack!!!) can capture the city by entering its tile. Note also that cities Heal automatically each turn (being constantly repaired by their inhabitants), making them even harder to capture.
What units can capture cities in Civ 5?
Melee naval units may attack other units in the sea, or coastal cities. They are also the only ones that may capture cities. There are certain late-game naval units that merit special attention: the Carrier, the Missile Cruiser, and the Nuclear Submarine.
How do I get more Settlers in Civ 5?
3:5311:07Civilization 5 Tutorial - Settlers, City Placement & Tile ImprovementsYouTubeStart of suggested clipEnd of suggested clipFast you go for liberty you go down the left hand side to get the first two to get the free settler.MoreFast you go for liberty you go down the left hand side to get the first two to get the free settler. And you take that first one on the right which will give you the free worker.
How do you capture a city?
To capture a city you need to bring its HP to 0. After a capture, HP is fully restored. In order to attack an enemy city, the head of the clan must select it and start the battle for Diplomacy Points. When a clan attacks a city it goes into "under attack" status, and in this state no other clans can attack the city.
How do you take a city in civilization?
The melee unit must physically occupy the city center after fully depleting the city's health in order to conquer a city officially. Once formally occupied by one of your melee units, the city borders will take on your civ's national colors, and you'll be presented with the option to either keep or raze the city.
Can a Privateer take a city?
You can capture a city simply by melee attacking it, like you would do with a normal unit. Remember that you can only take cities with a melee attack, you cannot take cities with ranged or air units. You can take cities with naval melee units, such as the Privateer or Destroyer.
Can frigates take cities?
Most melee units can capture a city unless you're explicitly told that they cannot attack cities (an example of this is the Helicopter Gunship). For example, Caravels and Privateers can capture cities since they are melee units, but Frigates or Galleasses can't since they are ranged units.
Can privateers take cities?
The Privateer's combat strength is significant: although lower than that of a Frigate, it is perfectly suited for assaulting coastal cities and taking other vessels through boarding maneuvers.
Can Venice capture cities?
Venice. You can never build or capture settlers. You can never annex conquered cities.
What is the best civilization in Civ 5?
These are the best civilizations in Civilization 5:Korea.Babylon.Brazil.France.Morocco.Venice.Byzantine.Arabia.More items...•
What happens if you settle on a luxury resource?
What happens if you build a city on a resource in Civ6? Settling on a strategic or luxury resource is very good, as you will not only gain extra yields once settled, but also will get the resource. In the case of a luxury resource you don't even need its technology to work it if you settle on it.
Can caravels take cities?
Finally, you can use Caravels to attack and take cities (although there is another Renaissance Era unit - the Privateer - that is better suited for those purposes). Still, remember that its combat strength is usually not enough for major battles, especially against later Renaissance Era ships.
What units can take over cities Civ 6?
The key to taking over an enemy city is to get a unit to defeat the health of the city center tile and then physically take it over. Importantly, the unit that takes over the city center must be a melee unit.
Can Scouts capture cities Civ 6?
With their ability to ignore terrain, scouts can often outrun the enemy army and force one of the enemy's real melee units to deal with them. With your opponent focusing on scouts, you are free to kill units/take cities with your archers and "real" melee units.
Can Tanks Take cities Civ 6?
Attacking cities cities late game with a tank army, does zero dmg against city with like 90d. i had 5 tank armys all attack a city and they did little to no damage. There might be a better attack method but feel like it should do a little more than nothing.
Top Voted Answer
You have to make the last hit with a non-ranged unit, ranged units can't capture a city.
Answer this Question
You're browsing GameFAQs Q&A as a guest. Sign Up for free (or Log In if you already have an account) to be able to ask and answer questions.
What is the purpose of War in Civ 5?
The purpose of War in Civ 5 is to take an opponent's Cities, as there is no real way to knock them down a peg otherwise. If you clear out a high-difficulty AI's Army, they'll just build another. Taking their Cities will prevent them from being able to do so effectively, crush their GPT and Science, and deny them Luxury Resources - giving all these ...
How to encircle a city?
Encircle a City before moving in to attack, being aware of the City's attack range of 2. Get your units in position, then move in . You do not want your Units to take damage until they are ready to attack. Cities typically have two attacks - most will store a Ranged Unit inside, and the City has an attack itself.
How many melee units do you need to attack a city?
Use 2-3 Melee Units to act as your front line against the City. Your Ranged and Siege can attack from 2 hexes away. You need the Melee to actually take the City once its health has been depleted, so keep at least one at full health, else have a fast unit like a Horseman/Cavalry to run in when the City is at 0 Health.
What does AI do when you declare war?
Ancient-Renaissance War. When you Declare War, the AI will typically move in with most of its Units to attack you and leave a little to defend. Their goal is to overwhelm, though they may leave units behind to defend.
Can the Mongolian swordsman move?
The Mongolian Swordsman cannot move to hit the wounded Swordsman to the bottom right. Units are able to move normally until they End a Turn next to a Unit, placing them in the Zone of Control. The Chariot Archer's not yet in a Unit's Zone of Control, thus could move behind the French Swordsman to the Marsh.
Do you need a melee unit to capture a barbarian camp?
You don't even need a melee unit to capture it! Just move your range unit (archer) on the settler. You can clear barbarian camps with the same way (even with a worker).
Can you capture a civ unit in Chazzycat Deity?
George is right, you only need melee units to capture cites, you can capture civ units and empty barb camps simply by walking any unit over it (but civ units can't capture civ units, as this goes against 1UPT) This is why ranged units are good for taking out barb camps, just snipe them till they're dead, then loot the empty tile!
How important is it to choose the right place to find a city in Civilization V?
Choosing the right place to found a city in Civilization V is very important, and determines to a large degree how successful your empire will be. You should think about the following things:
Why do civilizations need access to the ocean?
Any civilization needs access to the ocean - this ensures it will be able to build a fleet and explore the world easily, and also conduct sea trade. Additionally, there are plenty of resources to be found on coasts. Explore coasts and find a suitable place for a coastal city ASAP.
What happens when you have two cities in a resource?
Many times a resource may cause territorial contest. When there are two cities (one yours, one belonging to another civilization) in range of a resource, you have to be wary - the other civilization will try to take over the resource. In this case it's best to spend some Gold to purchase the tile in question. This will cause some diplomatic outrage, but it's better than to lose the resource.
How much culture points do you need to adopt new social policies?
The exact calculation is complex, and involves some bonuses, but the amount is somewhere between 5 and 10 percent of your current CP total for adopting the next policy. Note that the effect is immediate upon founding the city, so you may wish to delay settling the next city at least until you adopt the next policy.
What are the consequences of founding a city?
These are as follows: Culture points needed to adopt new Social Policies increase.
Can you settle a city on a tile?
Lastly, you can't settle a city on a tile containing City Ruins (where a city used to exist until it was razed).
Does setting a city on hills increase your combat strength?
Settling a city on hills will give it a nice defensive bonus (which directly increases city Combat Strength, so it's actually both a defensive and offensive bonus). But more importantly, observe where your neighbors are trying to settle, and try to block their territorial advancement by founding cities on your own.
