Settlement FAQs

how do i send settlers to a settlement

by Miss Antonina Waters II Published 3 years ago Updated 2 years ago
image

There are a few ways to send settlers to another settlement. You can use the Settlers tab in the main menu, or you can use the context menu on an individual settler. You can also use the “Send settler” button on the toolbar.

Open the Workshop menu and walk up to the settler you want to move. Move command should show up in the bottom command menu. Once you press it you will get a list of available settlements and the settler will go there. Just make sure you have enough resources at the target settlement to support new population.

Full Answer

How do I move a settler to a new settlement?

This is also done via the command menu found on the bottom of the Workshop menu. Open the Workshop menu and walk up to the settler you want to move. Move command should show up in the bottom command menu. Once you press it you will get a list of available settlements and the settler will go there.

How do I connect settlements to supply lines?

In the bottom of the screen you will see available commands for that settler and one of them will be Supply Line (press Q on the PC). Once you press the command a list of all available settlements will open up and you can choose which settlement you want to link to. Confirm your selection and presto – you have these connected.

Can you move settlers to another settlement in Fallout 4?

In fallout 4 it'd make sense if you can move all your settlers to one 'main' base rather than having everyone spread out, as no one location has enough settlers to run all the stores etc. How do I tell settlers to go to another settlement?

How do you link settlements in Minecraft?

In the bottom of the screen you will see available commands for that settler and one of them will be Supply Line (press Q on the PC). Once you press the command a list of all available settlements will open up and you can choose which settlement you want to link to.

image

How do you send settlers away?

0:134:13Fallout 4 - How To Move Settlers To Another Settlement - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you're gonna want to press square. And that will allow you to choose where you want to moveMoreAnd then you're gonna want to press square. And that will allow you to choose where you want to move them to and then you can send them to any one of your settlements.

How do you get settlers to come to your settlement?

How To Get More Settlers For Your Settlements In Fallout 4Food – The more food you have, the more people you can get. ... Recruitment Radio Beacon – This will be your bread and butter for recruitment. ... Water – Making sure you have enough water is another key. ... Beds – A bed per head is the motto here.More items...•

Why can'ti send settlers to sanctuary?

what is the population of Sanctuary? If it is at your charisma limit then, yes it will not be an option to move settlers to that location until you move some other out or your limit goes up.

How do you send items to other settlements in Fallout 4?

If you highlight over one of your settlers, you should see a "Supply Line" button option. Once you click that button, you'll get to choose which settlement to send that settler to. And that's basically all you have to do!

How do I summon settlers in Fallout 4?

Spawning settlers can be done with a console command 'player. placeatme 00020593 x' (x being number of settlers required), then assign them using the workshop move command.

What is the max settlement population in Fallout 4?

Each settlement has a default max population of 10 settlers plus each point of Charisma the character has, which has a base max of 22 (10 from leveling and +1 from bobblehead and You're SPECIAL! magazine respectively ) before factoring in extra charisma from armor and consumables.

Why can't I move my settlers to Sanctuary Hills?

Having enough beds and ensuring that those beds are under a ceiling prevents happiness from dropping. If you fail to respond to an attack on that settlement, happiness will drop. If not everyone has a job, happiness will drop.

How many settlers can you have in sanctuary?

Sanctuary is a really large settlement. Also you only get 10 settlers and an additional 10 more if you have 10 charisma (my cap is 19 with charisma gear).

Can you lose settlements in Fallout 4?

So as you can see the possibility of losing a settlement because it is unhappy is nothing but a complete myth. Morale of the settlement. Influenced by meeting basic needs and providing trading posts. High happiness increases the productivity of settlers.

Why can't I assign settlers to supply lines?

For a settlement to be available for a supply route assignment, the population must not exceed 10 + Charisma, this does not include any gear or drug modifiers. Once your population is above 10 + base Charisma, you can't assign a supply route to it.

How do I set up a supply line to a settlement?

Usage. To create a supply line, use the workshop in one of the settlements, highlight a settler and press [Q] (or RB/R1 on XBOX/PS4) to display a list of owned settlements. Select the settlement to which the player character wants to link the current settlement.

How do you share Junk between settlements?

You can scrap junk by throwing it on the floor in your settlement und then scrap them in build-mode. I use this to transport raw-materials around. Supply lines work for all the junk in your workshop's inventory.

How do I get more settlers in Sanctuary Hills?

Select excess settlers in those locations via the workshop mode (hold V down until it appears in the settlement radius) then target an excess settler and select "R" to "Move" him to a different settlement. Select "Sanctuary Hills" when the locations sub menu pops up.

How do I get 30 settlers in Fallout 4?

3:355:37Fallout 4 | How to get over 30 Settlers in Settlements | Full Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey will give you an extra five charisma points for a low amount of time that's a great grapeMoreThey will give you an extra five charisma points for a low amount of time that's a great grape Mentats you need to go to a chemistry station. And make them using hop flower Mentats.

How do you get more settlers in the castle?

0:032:50Fallout 4 - How To Get More Settlers To Your Settlements - YouTubeYouTubeStart of suggested clipEnd of suggested clip4 so it's basically a numbers game you just need to look at the numbers at the top of the screenMore4 so it's basically a numbers game you just need to look at the numbers at the top of the screen when you enter your Workshop mode. And you have to make sure that there's more food more war more beds.

How do you increase settlement population in Fallout 4?

You drop a bunch of guns on the ground of your settlement and then store them to your workbench. This reduces the size meter which tends to cap off how much you can build and may possibly impact the influx of settlers.

Does a settlement show up on a workbench?

If a settlement shows up or not also depends on the type of workbench, IIRC. Full workbench (the large red one) should always show up. Probably be related to keywords, as Pra suggested.

Does the location edge marker need to be included in Packins?

for a easy setup for wb/markers under packins there is a prebuild workbench with all markers/build box, it don't include the so called location edge marker, but that 1 is only needed to make it raid able

How does moving settlers from one settlement to the next work?

Moving settlers from one settlement to the next works just like setting up a supply line , only instead of choosing SUPPLY LINEyou need to choose MOVE.

Can you send a settlement to a grayed out settlement?

It is possible that the settlement you want to send them to is grayed out, however. This can happen when the settlement is full.

How to move settlers to another settlement?

Perhaps you have better vendors at a peripheral settlement. This is also done via the command menu found on the bottom of the Workshop menu. Open the Workshop menu and walk up to the settler you want to move. Move command should show up in the bottom command menu. Once you press it you will get a list of available settlements and the settler will go there. Just make sure you have enough resources at the target settlement to support new population. One thing to note is that named settlers, like Mama Murphy and the rest of the people from Concord, can not be moved to other settlements.

What does it mean to have one settlement entirely dedicated to trade?

That might mean that you do not have enough food in that settlement. You have to haul it from another settlement that might be a dedicated farming community. This is what a supply route is for.

Can you move settlers to other settlements?

One thing to note is that named settlers, like Mama Murphy and the rest of the people from Concord, can not be moved to other settlements. Use the bottom command menu to move a settler to a new location.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9