Local leader perk. Then approach a settler and hit R1 and select what settlement you want to set the trade route to. Putting the trade routes in a one way path from one end of the map to another seems to work for me at least.
How to share resources between settlements in Fallout 4?
Supply lines can be created between settlements to share resources and inventory among them, by assigning settlers as provisioners in Fallout 4.
How to set up supply routes in Fallout 4?
Fallout 4 supply route setup. Setting up a supply line will cost you one settler that will from then on be dedicated to moving supplies between settlements. Open up the Workshop menu while in a settlement (hold V on the PC for example) and walk up to an unassigned settler.
How do I share a workshop with another settlement?
Go up to a settler and press the "R" key to set up a "Supply Route". From there, you can then establish a supply line between the current settlement, and the one you want. Afterwards, they'll turn into a provisioner, and they'll share a workshop.
How to move settlers from one settlement to the next?
Moving settlers from one settlement to the next works just like setting up a supply line, only instead of choosing SUPPLY LINE you need to choose MOVE. Image originating from @ kalina 's answer linked above. After that, you'll get a list of settlements to choose from.
How do you transfer Junk between settlements?
You can scrap junk by throwing it on the floor in your settlement und then scrap them in build-mode. I use this to transport raw-materials around. Supply lines work for all the junk in your workshop's inventory.
Do supply lines work both ways Fallout 4?
yes both ways. but always a settler needs to be sent for each base. [vanilla]. Just to add one more thing to the mix, yes, a supply line is two way BUT the provisioner counts towards the population of the settlement of ORIGIN only.
How do you trade with settlers?
0:131:45How to Give Weapons and Armor to Settlers and Traders in Fallout 4YouTubeStart of suggested clipEnd of suggested clipSo find your settler. You'll always be welcome here wait for them to greet you i just want to tradeMoreSo find your settler. You'll always be welcome here wait for them to greet you i just want to trade a few things of course enter to talk. And ask them to trade you'll get the trade interface.
What's the biggest settlement in Fallout 4?
Since vault 88 would require mods to utilize it's larger space, Spectacle Island takes the cake for Largest Settlement in Fallout 4. Spectacle island is another extremely dangerous settlement and only higher level players should attempt to settle here.
What is the best settlement in Fallout 4?
17 Best Settlements In Fallout 4, Ranked1 Spectacle Island. Easily the best settlement in the game is this massive private island.2 The Castle. ... 3 Abernathy Farm. ... 4 Vault 88. ... 5 Graygarden. ... 6 Bunker Hill. ... 7 Echo Lake Lumber. ... 8 Sanctuary Hills. ... More items...•
What is trade settlement process?
Following a trade of stocks, bonds, futures, or other financial assets, trade settlement is the process of moving securities into a buyer's account and cash into the seller's account. Stocks over here are usually settled in three days.
How do I trade in settlement survival?
1:1711:08Settlement Survival Tips & Tricks: Trading and Fishing - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you already have your water mill put down you go over to your water mill you open it up and whereMoreIf you already have your water mill put down you go over to your water mill you open it up and where it says production you change it from domestic fuel go to building materials.
How do I make a settler a provisioner?
Move your cursor over a Settler and press the button prompt to assign them to a supply line. A menu will appear asking where you would like to send the settler. Assigning a settler to a supply line changes the NPC into a Provisioner.
Do weapons transfer in supply lines Fallout 4?
Weapons and Armor will not automatically be broken down into components when crafting, so will not transfer via supply line. Furniture, Walls, Turrets, Shops and other craftable settlement stuff will not transfer via supply line, with the exception of crops.
What is the point of supply lines in Fallout 4?
A supply line is something that connects settlements and allows them to share workshop inventory space. This means you could deposit something in the Sanctuary Hills workshop and retrieve it at the Hangman's Alley workshop without having to schlep it all the way there yourself.
How do you establish supply lines between settlements?
1:333:57FALLOUT 4 : How to Establish Supply Lines Between Settlements!YouTubeStart of suggested clipEnd of suggested clipGo into your Workshop menu. And find a settler keep in mind this will require a dedicated settler toMoreGo into your Workshop menu. And find a settler keep in mind this will require a dedicated settler to go between both settlements. And they can only establish the supply line with one other settlement
Why can't I assign settlers to supply lines?
For a settlement to be available for a supply route assignment, the population must not exceed 10 + Charisma, this does not include any gear or drug modifiers. Once your population is above 10 + base Charisma, you can't assign a supply route to it.
Why are settlements useful?
But while settlements are useful for gathering all your resources in one place, it's generally more helpful to access your stockpiles of goods from any settlement: That way you won't lose time constantly traveling back to the same town just to drop off some junk or pick up a weapon.
Can you make supply lines between settlements?
You can create supply lines between any settlement, but you'll need different settlers to connect all your settlements. If a settler is already en route to a settlement, don't send them to a different settlement or you'll break the supply line you already have.
What does it mean to have one settlement entirely dedicated to trade?
That might mean that you do not have enough food in that settlement. You have to haul it from another settlement that might be a dedicated farming community. This is what a supply route is for.
How to move settlers to another settlement?
Perhaps you have better vendors at a peripheral settlement. This is also done via the command menu found on the bottom of the Workshop menu. Open the Workshop menu and walk up to the settler you want to move. Move command should show up in the bottom command menu. Once you press it you will get a list of available settlements and the settler will go there. Just make sure you have enough resources at the target settlement to support new population. One thing to note is that named settlers, like Mama Murphy and the rest of the people from Concord, can not be moved to other settlements.
Where is the supply line command in a workshop?
Open the Workshop menu and choose the Supply Line command in the bottom of the screen.
Is there such a thing as a trade route?
There is no such thing as a trade route in the game. No income will come out of establishing supply lines. There are many reasons why you would want to establish supply routes. First of all, settlements that are linked via supply lines share their workshop inventory.
Can you move settlers to other settlements?
One thing to note is that named settlers, like Mama Murphy and the rest of the people from Concord, can not be moved to other settlements. Use the bottom command menu to move a settler to a new location.
How is settlement in Fallout 4 managed?
A settlement in Fallout 4 is managed and depends on various factors like the settlers, indicators, supplies, and supply routes. We will discuss all in details:
How many people can you have in a settlement?
These are also known as settlers, and the maximum number of settlers in a settlement is 10. The number of people in a settlement can be increased by obtaining charisma point, 1 charisma point = 1 new settler.
How to make a settler take care of crops?
Assign a task to this settler. For example, if you want to make a settler take care of crops, click on the field, and this will prompt the settler to take care of the corps.
What indicator shows the total quantity of food produced by crops in your settlement?
Food: This indicator shows the total quantity of food produced by crops in your settlement.
Is it difficult to build a settlement in Fallout 4?
Creating and managing a settlement in Fallout 4 might seem overwhelmingly difficult, but as soon as you have learned the basics, you will be creating and managing settlements all over the Commonwealth. Yes, we know that the basics of building in Fallout 4 have not been well-defined by Bethesda. This is a guide on How to create and manage a Settlement in Fallout 4.
How does moving settlers from one settlement to the next work?
Moving settlers from one settlement to the next works just like setting up a supply line , only instead of choosing SUPPLY LINEyou need to choose MOVE.
Can you send a settlement to a grayed out settlement?
It is possible that the settlement you want to send them to is grayed out, however. This can happen when the settlement is full.
How do supply lines work in Fallout 4?
Supply lines can be created between settlements to share resources and inventory among them, by assigning settlers as provisioners in Fallout 4 .
What happens when you attack a provisioner?
The provisioner will recover from the attack and continue on its assigned route while the brahmin is left to its own devices. They may eventually result in the raining brahmin phenomenon where upon entering a cell the game doesn't have a location to assign the brahmin and simply places it at random on or above the terrain.
How to change a provisioner's clothing?
To change or update a provisioner's clothing or weapons, initiate dialogue and trade items with them.
Do provisioners have armor?
Provisioners will engage hostile creatures and enemies along their path, so it is advisable to equip them with appropriate weapon s and armor so they can defend themselves.
Do settlements have to be connected?
Settlements share resources with all other settlements that are part of its supply line network. Two settlements do not have to be directly connected. In other words, if the Sole Survivor connects settlement A → B, B → C and C → D, then A, B, C and D will also share resources with each other despite not directly being connected since they are still part of the same network.
Is it possible to establish supply routes between the Commonwealth, the Island, and Nuka-World?
It is possible to establish supply routes between the Commonwealth, the Island, and Nuka- World, giving one access to stored resources in all places.
Can a provisioner travel between settlements?
The provisioner will actually travel between the two connected settlements, so it may be difficult to reassign the worker, since they may not be in their home settlement. It is also possible to reassign the provisioner using the Vault-Tec Population Management System that came with the add-on Vault-Tec Workshop.
